Product Category

Wire Harness Manufacturing

Browse our wire harness and custom cable assembly catalog, featuring servo cables, waterproof cabling, and LAN patch cables with technical pinouts and datasheets.

Looking for end-to-end OEM wire harness manufacturing support, DFM engineering reviews, or custom harness prototyping? Explore our Wire Harness Manufacturing Services.

59 products found

Browse available products in this category.

0.4mm Pitch 40-Pin Micro-Coaxial Shielded Cable Assembly 40AWG 50 Ohm LVDS/FPGA-RF Harness
Custom Cable Assemblies

0.4mm Pitch 40-Pin Micro-Coaxial Shielded Cable Assembly 40AWG 50 Ohm LVDS/FPGA-RF Harness

Intermateable With: 20878-040T-01 / I-PEX CABLINE-CA II 40-Pin Series Mates With: 20525-040E Series 0.4mm Pitch 40-Pin Board Receptacle Header
Cable Type
: Shielded Micro-Coaxial Cable Assembly (LVDS / FPGA-RF Harness)
Number of Positions / Pins
: 40 Pins
Pitch
: 0.4 mm
Orientation Configuration
: P1: Goldfinger Down / P2: Goldfinger Up (1-to-1 Pinout)
Overall Cable Length
: 60.5 mm (+2.5 / -1.5 mm)
Wire Gauge & Impedance
: 40 AWG, 50 Ohms Micro-Coaxial Cable (41 PCS)
Strain Relief Method
: UV Adhesive Encapsulation at Both Soldering Points
Standard Compliance
: RoHS Compliant, 100% Electrical Tested
Cat6 STP Shielded RJ45 Ethernet Patch Cable Assembly (26AWG, OD6.0mm)
Custom Cable Assemblies

Cat6 STP Shielded RJ45 Ethernet Patch Cable Assembly (26AWG, OD6.0mm)

Drop-in for: 15018 / 15020 series, Amphenol CONEC 17-10006 series, Stewart Connector BM-CBRR / SS-60400 series, L-com TRD855DSZ / TRD695 series Mates With: 8P8C RJ45 Female Sockets, Couplers, Keystone Jacks (Unshielded & Shielded)
Connector A
: RJ45 PLUG 8P8C, Shielded with Metallic Shell
Connector B
: RJ45 PLUG 8P8C, Shielded with Metallic Shell
Cable Type
: CAT6 STP (Shielded Twisted Pair)
Wire Gauge & Wire Count
: 26AWG × 4PR (4 Pairs) + Drain (DA)
Outer Diameter (OD)
: 6.0 mm
Conductor Material
: Bare Copper (Stranded)
Length Options
: 250 ± 15 mm / 1000 ± 30 mm
Shielding
: Aluminum Foil Shielding with Ground/Drain Connection (STP)
Pin Assignment
: Straight Through (Pin 1 to Pin 1 ... Pin 8 to Pin 8 + Shield to Shield)
Packaging Method
: 1 PCS / PE BAG
Standard Compliance
: RoHS
Custom 7-Pin Metal Hydraulic Proportional Valve Cable Assembly
SERVO CABLE

Custom 7-Pin Metal Hydraulic Proportional Valve Cable Assembly

Alt. for: MS3106 Series / Hirschmann CA Series 7-Pin equivalents (As a cost-effective, custom-engineered OEM alternative). Mates With: 7-Pin receptacles on Moog, Bosch Rexroth, Parker, and Vickers hydraulic proportional valves and servo-valves.
Connector A:
: 7-Pin Metal Valve Plug
Connector B:
: Flying Leads or Custom
Key Position:
: A-Code (Standard)
Wire Gauge:
: 20 AWG (Standard) / Customizable
Connection Type:
: Threaded Screw Locking
Cable Length:
: Fully Customizable (e.g., 1m - 20m)
Custom 7-Position Valve Connector to Servo Cable Assembly
SERVO CABLE

Custom 7-Position Valve Connector to Servo Cable Assembly

Alt. for: C016 Series 7-Pin Circular Connectors Compatible Mates With: 7-Pin Proportional Valve Receptacles, Servo Motor Interfaces, and Hydraulic Control Modules.
Number of Pins
: 7 Positions (3 Power + 4 Signal)
Cable Jacket Material
: PUR (Polyurethane) or PVC
Connector Type
: Circular / DIN Valve Style
Wire Gauge (Power)
: 16 AWG - 18 AWG
Cable Length
: Custom OEM Lengths
Wire Gauge (Signal)
: 22 AWG - 24 AWG
Ingress Protection
: IP67 (Mated Condition)
Shielding Type
: Tinned Copper Braid (EMI/RFI)
Custom D-Sub 9-Pin Servo Encoder Serial Cable Assembly
SERVO CABLE

Custom D-Sub 9-Pin Servo Encoder Serial Cable Assembly

Intermateable With: DB9 / TE Connectivity AMPLIMITE / Amphenol D-Subminiature Series Compatible Mates With: 9-Pin Receptacles on Servo Drives (e.g., Yaskawa, Panasonic, Delta), PLCs, and Industrial PCs.
Connector Type
: D-Sub 9-Pin (DB9) Male/Female
Cable Architecture
: Twisted Pairs for Differential Signals
Number of Pins
: 9 Positions
Wire Gauge
: 24 AWG to 28 AWG
Locking Mechanism
: 4-40 UNC Thumbscrews / Standoffs
Shielding Type
: Aluminum Foil + Tinned Copper Braid
Cable Length
: Custom OEM Lengths (1m, 3m, 5m+)
Protocol Support
: RS-232, RS-422, RS-485
Custom Delta Compatible Servo Encoder & Power Cable Assembly
SERVO CABLE

Custom Delta Compatible Servo Encoder & Power Cable Assembly

Drop-in for: Delta ASD-CAEN / ASD-CAPW Series Standard Servo Cables Compatible Mates With: ASDA-A2, ASDA-B2, ASDA-A3, and ASDA-B3 Series Servo Drives and Motors.
Compatibility
: Delta ASDA-A2 / B2 / A3 / B3 Systems
Cable Architecture
: Twisted Pairs (Encoder) / Multi-Core (Power)
Cable Types Included
: Absolute/Incremental Encoder & Power
Wire Gauge (Encoder)
: 22 AWG to 26 AWG
Cable Length
: Custom OEM Lengths (e.g., 3m, 5m, 10m)
Wire Gauge (Power)
: 14 AWG to 18 AWG
Bend Radius (Dynamic)
: Fixed: 8x OD / Flexible: 10x OD
Shielding Type
: Tinned Copper Braid (≥ 85% Coverage) + Foil
Custom Inovance (Huichuan) Servo Encoder Cable Assembly, 15-Pin to DB9
SERVO CABLE

Custom Inovance (Huichuan) Servo Encoder Cable Assembly, 15-Pin to DB9

Alt. for: S6-L-T series, offering cost-effective functional equivalents). Mates With: IS620 / SV660 Series Servo Drives (Encoder Interface) / Standard DB9 Receptacles.
Connector A:
: 15-Pin Servo Plug
Connector B:
: DB9 (9-Pin) Plug
Wire Gauge:
: 28 AWG (Signal) / 24 AWG (Power)
Cable Length:
: Fully Customizable (0.5m - 20m)
Connection Type:
: Plug-and-Play Assembly
Bend Radius:
: Fixed: 8x OD / Flexible: 10x OD
Custom Mitsubishi Servo Encoder Cable Assembly, CM10 to IEEE1394
SERVO CABLE

Custom Mitsubishi Servo Encoder Cable Assembly, CM10 to IEEE1394

Alt. for: CM10-SP10S-M / 3M IEEE1394 Series equivalents (As a customized OEM equivalent to standard Mitsubishi encoder cables like MR-J3ENCBL). Mates With: MR-J3 / MR-J4 Series Servo Motors (Encoder Port) and compatible Servo Amplifiers.
Connector A (Motor Side):
: CM10-SP10S Plug (10-Pin)
Connector B (Drive Side):
: IEEE1394-10P Plug
Key Position:
: A-Code
Wire Gauge:
: 24 AWG (Signal) / 22 AWG (Power)
Connection Type:
: Push-Pull / Screw Locking
Cable Length:
: Fully Customizable (e.g., 1m - 30m)
Custom Modrol Servo Encoder Cable Assembly, 15-Pin to HD15
SERVO CABLE

Custom Modrol Servo Encoder Cable Assembly, 15-Pin to HD15

Alt. for: N/A (Engineered as a highly reliable, custom OEM equivalent to standard Modrol encoder cables). Mates With: HD15 (High-Density D-Sub 15-Pin) Receptacles on industrial controllers.
Connector A (Motor Side):
: 15-Pin Servo Plug
Connector B (Drive Side):
: HD15 (High-Density D-Sub) Plug
Wire Gauge:
: 28 AWG (Standard) / Customizable
Cable Length:
: Fully Customizable (e.g., 1m - 30m)
Connection Type:
: Friction Fit / Screw Locking
Bend Radius:
: Fixed: 8x OD / Flexible: 10x OD