2026年8月24日
Rugged Robotics Cable Assemblies: Key Design Considerations
Specifying rugged robotics cable assemblies? Learn key design factors for sealing, high-flex conductors, and strain relief. Read the...
Detailed Product Information
Technical Data & Reference
Structured parameters, material notes, application context and frequently asked questions for engineering and procurement evaluation.
Competitor & Cross-Reference
- Alternative Type
- Intermateable With
- Competitor Part Number
- Phoenix Contact SACC-M8MR-4CON-M / Binder 713/768 Series / Murrelektronik 7000-08061 / TE Connectivity T4012008041-000
- Mates With
- Standard IEC 61076-2-104 M8 D-Code 4-Pin Female Sockets, Panel Mount Receptacles, and Overmolded Sensor/Ethernet Cordsets
Intermateable: This part is mechanically and electrically compatible for mating with the listed competitor connector. Mixed use in the same connector system is supported.
Technical Specifications
- Connector Type
- M8 Circular Field Installable Plug (Male Right-Angle)
- Coding & Number of Pins
- D-Code 4-Pin (Series also supports A-Code 3/4/6/8-Pin, B-Code 5-Pin)
- Mounting & Termination
- Free Hanging Right-Angle (90°), Solder Pin / Solder Cup Termination
- Key Dimensions
- Body Envelope: ~37.0mm × 27.5mm; Max Diameter: Ø14.0mm; Thread: M8x1.0; Wrench Size: SW10.5
- Applicable Cable Diameter
- Ø3.0mm ~ 5.0mm (5.0mm Max.)
- Contact Pin Size
- 1.0mm (3/4/5-Pin), 0.7mm (6-Pin), 0.6mm (8-Pin)
- Mating Durability
- ≥ 500 Mating Cycles
- Standard Compliance
- IEC 61076-2-104, IP67 Protection Degree, RoHS Compliant
Material Composition
| Material | Value / Description |
|---|---|
| Insulation & Right-Angle Shell | Polyamide (PA), Black |
| Contact Material & Plating | Copper Alloy, Gold-Plated |
| M8 Metal Thread & Connect Nut | Copper Alloy, Nickel-Plated |
| Sealing Elements | O-Ring: Black NBR; Cable Seal: Black Silicone |
| Cable Clamp & Pressing Nut | Polyamide (PA), Black |
Technical Characteristics
| Characteristic | Value |
|---|---|
| Rated Current | 4A (4-Pin D-Code & 3/4-Pin A-Code); 3A (5-Pin B-Code); 1.5A (6/8-Pin A-Code) |
| Rated Voltage | 60V DC (3/4-Pin A/D-Code); 30V DC (5/6/8-Pin A/B-Code) |
| Ingress Protection | IP67 (Dust-tight and waterproof in correct locking state) |
Application Scenarios
-
100 Mbps Industrial Ethernet and PROFINET Fieldbus Network Interconnects (D-Code 4-Pin Standard)
-
Space-Constrained Robotic Arms, AGVs, and Compact Factory Automation Equipment
-
Industrial Sensors, Photoelectric Switches, and Pneumatic Valve Manifolds
-
PLC Remote I/O Modules and Compact Machine Vision Cameras
-
On-Site Industrial Cable Repair, Custom Right-Angle Routing, and Field Retrofit Harnesses
Frequently Asked Questions
Why choose a right-angle M8 D-Code 4-Pin male plug over a straight field-installable connector?
The 90-degree right-angle M8 D-Code 4-Pin male plug features a compact ~37.0mm by 27.5mm profile that routes cables parallel to the mounting surface, preventing sharp cable bends and mechanical stress in tight enclosures or moving robotic axes. Compliant with IEC 61076-2-104, the D-Code 4-Pin interface is rated at 4A and 60V DC with 1.0mm gold-plated pins, making it suitable for both compact Industrial Ethernet/PROFINET nodes and sensor power delivery.
What cable outer diameter and termination tools are needed to assemble this right-angle M8 plug?
This field-wireable right-angle M8 connector accepts round industrial cables with an outer diameter between 3.0mm and 5.0mm. Assembly requires soldering individual wire conductors into the 1.0mm gold-plated solder cups and tightening the rear Polyamide (PA) pressing nut using an SW10.5 hex wrench to engage the internal cable clamp and silicone seal.
How is the IP67 waterproof rating maintained in the right-angle plastic housing design?
The connector achieves IP67 dust and water protection in the locked mating state through a multi-point sealing system consisting of a black NBR O-ring at the nickel-plated copper alloy M8x1.0 thread interface and a rear black silicone gland seal. This construction protects the internal solder terminations against moisture, oil, and dust across an operating temperature range of -40°C to +80°C for at least 500 mating cycles.
Overview and Application Notes
The M8 D-Code 4-Pin Male Right-Angle Field Installable Connector is an unshielded circular plug specifically engineered for space-constrained Industrial Ethernet, PROFINET, and fieldbus sensor/actuator terminations. Compliant with IEC 61076-2-104 standards, this 90-degree free-hanging plug features a rugged black Polyamide (PA) housing, precision 1.0mm gold-plated solder cup pins, and a nickel-plated copper alloy M8x1.0 threaded coupling nut that delivers reliable IP67 waterproof and dust-tight sealing in demanding factory automation environments.
Key Features
- Coding & Pin Configuration: Standardized D-Code 4-Pin male plug interface for industrial data and sensor networks (series also available in A-Code 3/4/6/8-Pin and B-Code 5-Pin configurations).
- Electrical Performance: Rated for 4A current and 60V DC operating voltage, utilizing 1.0mm gold-plated copper alloy male pins for low contact resistance and high oxidation resistance.
- Space-Saving 90° Right-Angle Design: Compact L-shaped body (~37.0mm x 27.5mm, Ø14.0mm max diameter) eliminates excessive cable bend stress in tight control cabinets and robotic arms.
- IP67 Environmental Sealing: Equipped with a black NBR O-ring and black silicone cable gland seal to ensure complete IP67 protection when locked, operating reliably from -40°C to +80°C for ≥500 mating cycles.
- Field Termination & Strain Relief: Solder pin termination paired with an integrated PA cable clamp and SW10.5 hex pressing nut, accommodating cable outer diameters from 3.0mm to 5.0mm.
Engineering Specifications & Field Assembly Guidance
Designed for rapid on-site cable assembly and maintenance, this right-angle M8 male plug accepts round industrial cables with an outer jacket diameter of 3.0mm to 5.0mm. Prior to soldering, slide the SW10.5 PA pressing nut, black silicone seal, cable clamp, and right-angle PA housing shell over the stripped cable end. Solder the individual wire conductors into the 1.0mm gold-plated solder cups, verify pin-to-pin isolation, and thread the right-angle shell onto the contact insert. Finally, tighten the rear pressing nut to compress the silicone seal and internal clamp securely around the cable jacket to achieve full IP67 ingress protection and mechanical strain relief.
