B2B Electronic Connection Solution

2FF SIM Card 8-Pin Hinged SMT 2.50mm Profile Connector

Factory-backed connector sourcing and electric connection support for OEMs, distributors and electronic equipment manufacturers.

Product View
2FF SIM Card 8-Pin Hinged SMT 2.50mm Profile Connector

OEM Ready

Factory Supply

Fast Quote

Product Specifications

Key parameters for OEM, distributor and engineering evaluation.

Parameters
Card Size
2FF SIM
Card Insertion Type
Hinged
Number of Contacts
8
Card Detection Switch
With - Normally Open
Locating Peg
Without
Profile
2.00mm to 2.99mm

Detailed Product Information

Technical Data & Reference

Structured parameters, material notes, application context and frequently asked questions for engineering and procurement evaluation.

Competitor & Cross-Reference

Alternative Type
Functional Alternative
Competitor Part Number
Amphenol C707-10M008, Molex 91228 Series
Mates With
ISO/IEC 7816 Standard 2FF (Mini-SIM) Cards (25.00mm x 15.00mm)

Functional Alternative: This part provides equivalent performance characteristics as a cost-optimized substitute. Minor design review recommended before adoption.

Technical Specifications

Connector Type
2FF (Mini-SIM) Hinged Card Socket
Number of Positions / Pins
8 Pins (C1, C2, C3, C5, C6, C7 + 2x SW Card Detection Terminals)
Mounting Type
Surface Mount (SMT), Hinged Flip-Top with Slide-Lock (OPEN / LOCK)
Key Dimensions
Length: 29.60 ±0.20mm, Width: 17.20 ±0.20mm, Profile Height: 2.50 ±0.10mm (Cover Step: 2.20 ±0.10mm, Standoff: 0.20mm)
Contact Pitch & Pad Width
2.54 ±0.10mm Pitch (3x2.54mm per row), 0.75mm Pad Width
Recommended PCB Footprint Span
29.60mm x 17.20mm (Inner Pad Span: 15.20 ±0.10mm, Longitudinal Span: 24.80 ±0.20mm)

Technical Characteristics

Characteristic Value
General Tolerances X. ±0.30mm, .X ±0.25mm, .XX ±0.15mm, .XXX ±0.10mm

Application Scenarios

  • Industrial Cellular Routers, 4G/5G DTUs, and Edge IoT Gateways

  • Commercial POS Terminals and Smart Payment Hardware

  • Automotive Telematics Control Units (TCU) and Fleet GPS Trackers

  • Smart Utility Meters (AMI) and Remote Telemetry Controllers

  • Single Board Computers (SBC) and Industrial Panel PCs

Frequently Asked Questions

How does the hinged slide-lock mechanism work on this 2.50mm profile 2FF SIM connector?
The hinged cover flips open to accept a standard 2FF Mini-SIM card and slides horizontally from the OPEN position to the LOCK position once closed. This positive mechanical latch maintains a low 2.50mm (±0.10mm) above-board height while preventing card dislodgement in high-vibration industrial and vehicular environments, eliminating the edge clearance required by push-push trays.
What are the PCB footprint and pad pitch requirements for SMT assembly?
The PCB layout requires an overall mounting envelope of 29.60mm by 17.20mm, featuring two parallel rows of four 0.75mm-wide SMT pads spaced at a 2.54mm (±0.10mm) pitch with an inner transverse span of 15.20mm (±0.10mm) and a longitudinal structural span of 24.80mm (±0.20mm). Maintaining general decimal tolerances within ±0.10mm to ±0.15mm ensures reliable solder paste registration and mechanical hold-down strength.
What is the pin assignment of the 8-pin SIM socket including the SW terminals?
The 8-pin footprint maps six electrical pads to ISO/IEC 7816 SIM contacts (C1, C2, C3 on one row and C5, C6, C7 on the opposite row) and dedicates the remaining two SW pads to the integrated card-detection switch. Hardware engineers can route the SW terminals to a microcontroller GPIO pin to verify physical SIM card insertion and lock status.

Overview and Application Notes

This ultra-low-profile 2FF (Mini-SIM) 8-pin card connector features a hinged flip-top cover with a slide-lock mechanism (marked OPEN/LOCK) designed for reliable Surface Mount Technology (SMT) PCB assembly. Engineered with a compact 2.50mm above-board profile height and a 29.60mm x 17.20mm footprint, it integrates six standard ISO/IEC 7816 signal contacts alongside two dedicated card detection switch (SW) terminals, providing secure SIM retention in high-vibration industrial and wireless communication devices.

Key Features

  • 8-Pin Signal & Switch Layout: Equipped with standard C1, C2, C3, C5, C6, and C7 contacts plus dual SW card-presence detection terminals.
  • Slide-Lock Hinged Cover: Flip-top mechanical lid with directional OPEN and LOCK locking action prevents accidental card ejection under shock or vibration.
  • Ultra-Low 2.50mm Profile: Total mounted height of 2.50mm (±0.10mm) with a 0.20mm base standoff clearance for slim enclosure designs.
  • Standard 2.54mm Contact Pitch: Symmetrical 4-pad-per-side SMT solder footprint on a 2.54mm (±0.10mm) pitch simplifies automated pick-and-place assembly.
  • Precision Dimensional Control: Manufactured to tight linear tolerances (.XX ±0.15mm, .XXX ±0.10mm) for consistent coplanarity and solder joint reliability.

Engineering Specifications & PCB Integration

Designed for top-side or bottom-side SMT reflow mounting, this 2FF SIM socket occupies an overall layout envelope of 29.60mm (±0.20mm) in length by 17.20mm (±0.20mm) in width, with an inner pad-row span of 15.20mm (±0.10mm) and outer mounting span of 24.80mm (±0.20mm). The eight SMT signal and switch pads utilize a 0.75mm pad width arranged across three 2.54mm pitch intervals (7.62mm group span per side), accompanied by structural hold-down solder tabs (1.90mm x 2.18mm / 1.50mm x 2.00mm zones) to reinforce mechanical shear strength during manual card insertion and slide-lock actuation.

Related Articles

Related Products

HDMI Connectors

HDMI connectors are digital interfaces used for transmitting high-definition audio and video data through a single cable. They...

View Product

Product Document

Download Product PDF

Use this document for internal review, engineering comparison, and RFQ preparation.

2FF-SIM-Card-8-Pin-Hinged-SMT-Connector-2.50mm-Datasheet

Build a Reliable Supply Plan for This Product

We support importers, distributors, and electronics manufacturers with product matching, alternative sourcing, assembly integration, and factory-direct production coordination.

Include These Details in Your RFQ

  • 1 Target quantity, annual forecast, and delivery destination.
  • 2 Drawing, datasheet, sample photo, or current supplier part number.
  • 3 Electrical, mechanical, compliance, testing, and packaging requirements.